Deal analysis

How to Estimate Rehab Costs on a House Flip (2026 Guide)

How investors estimate repair costs line by line: rehab cost per square foot, 2025 US costs for paint, floors, kitchens, baths, roofs and systems, the extras people forget and a worked example.

Free tool in this guide Rehab cost estimator Try it free, no sign-up

Quick answer

List every job the house needs, price each one as a quantity times a cost per unit (for example paint at about $2–6 per square foot or a cosmetic kitchen update at about $10,000–20,000), adjust for your area and finish level, then add permits, a contractor’s fee if one runs the job (10–20%) and a 10–20% contingency. As a quick check, many investors expect up to about $40 a square foot for a light rehab, $40–75 for a medium one and $75–135 for a heavy one.

Most flips that lose money don’t lose it on the purchase price. They lose it on the rehab: the roof nobody looked at, the panel that won’t pass inspection, the contingency that was never in the budget. A good rehab estimate won’t make a bad deal good, but it stops you from paying too much for one. Here’s how investors estimate repair costs line by line in 2026, with typical US costs, the extras people forget and a worked example you can copy.

Rehab cost per square foot: the quick check

Before you price anything in detail, a cost per square foot tells you roughly what kind of job you’re looking at. Many investors use these ranges for a single-family house today:

  • Light, cosmetic rehab: up to about $40 a sq ft. Paint, flooring, fixtures, hardware, some landscaping. The house works; it just looks tired.
  • Medium rehab: about $40–75 a sq ft. The cosmetic work plus a kitchen and bathroom update, a water heater, maybe some windows.
  • Heavy rehab: about $75–135 a sq ft. Systems (HVAC, electrical, plumbing), a roof, layout changes or water damage.
  • Full gut: $135 a sq ft and up. Back to the studs.

So a 1,500 sq ft house that needs a medium rehab is often somewhere around $60,000 to $110,000. Older rules such as “$10, $20 or $30 a square foot” come from cheaper years and are far too low now. Use the per-square-foot number as a sanity check only: the real estimate comes from the list of jobs.

Step 1: Walk the house in the right order

Walk every house with a scope sheet and look at the expensive things first, because they decide whether the deal works at all:

  1. Roof: age, missing shingles, soft spots, stains on the ceilings below.
  2. Foundation: cracks wider than a coin, doors that stick, sloping floors, water in the basement or crawl space.
  3. HVAC: the age on the furnace and AC labels. Units over 15–20 years old are near the end.
  4. Electrical: the panel brand and size, ungrounded outlets, old wiring.
  5. Plumbing: pipe material (galvanized or polybutylene often means a repipe), water heater age, leaks.
  6. Then the cosmetics: kitchen, bathrooms, flooring, paint, doors, windows, exterior and yard.

If you can, bring a contractor or an inspector to the first walk-through on older houses. An inspection costs a few hundred dollars; one surprise sewer line or foundation repair costs thousands.

Step 2: Price each job

Every line is a quantity times a cost per unit. These are rounded US national figures for 2025 from Angi and HomeAdvisor cost guides and the 2025 Remodeling Cost vs Value report. Use them to build a first budget, then replace them with real quotes:

  • Interior paint: about $2–6 per sq ft of floor (walls only is cheaper; walls, trim and ceilings cost more).
  • Vinyl plank (LVP) flooring: about $3–10 per sq ft installed. Most flips use it in the living areas and kitchen.
  • Kitchen: about $10,000–20,000 for a cosmetic update (paint or new cabinet doors, counters, sink, appliances). A minor mid-range kitchen remodel averages $28,458 nationally.
  • Bathroom: about $3,000–10,000 for a cosmetic update, $10,000–25,000 for a partial remodel. A mid-range bathroom remodel averages $26,138.
  • Roof (asphalt shingle): about $450–850 per square (100 sq ft of roof), typically $550–750.
  • Furnace and AC together: about $5,000–12,500, around $7,500 on average.
  • Water heater: about $900–1,800 for a tank, $1,400–3,900 for tankless.
  • Electrical panel upgrade to 200 amps: about $1,300–3,000. A full rewire is roughly $3–10 per sq ft.
  • Repipe: about $1,500–15,000, around $7,500 on average.
  • Windows: about $180–410 each installed for standard replacements.
  • Dumpster (20-yard): about $275–700 per rental. Most rehabs need more than one.
  • Foundation repair: about $2,200–8,100 for typical jobs; serious structural work can pass $25,000.

The free rehab cost estimator has all of these as line items: tick what the house needs, and the quantities follow the house size while the costs follow the finish level.

Step 3: Adjust for your area and your exit

National averages are a starting point. Two things move them most:

  • Where the house is. Labour costs differ a lot between a small Southern town and a big coastal city. If your contractors’ quotes keep coming in 15% above the averages, raise every line by 15%. The estimator’s area setting does this in one click.
  • Who will live there. A rental needs durable, basic finishes. A flip needs what buyers in that neighbourhood expect to see, and no more: granite in a starter-home area won’t sell the house for more, it just costs you the profit. A premium flip in a high-end area needs better finishes than either.

Step 4: Add the costs people forget

This is where most rehab budgets go wrong. After the jobs themselves, add:

  • Contingency: 10–20%. About 10% for a cosmetic job on a newer house, 15–20% for older houses, big rehabs or anything you couldn’t fully see. Once walls are open there is almost always something.
  • A general contractor’s fee: 10–20% if a GC runs the job and hires the trades. If you manage the trades yourself, you save it, but you pay in time.
  • Permits: a typical building permit is around $500–3,000, about $1,650 on average, more for big jobs. Unpermitted work can stop a sale at the buyer’s inspection.
  • Holding costs during the rehab: loan interest, insurance, utilities and taxes every month. These aren’t part of the repair budget, but they belong in the deal. The fix and flip calculator adds them for you.

A worked example

A 1,500 sq ft house with 2 bathrooms in an average-cost area, finished for a flip:

  • Interior paint, 1,500 sq ft at $3: $4,500
  • Vinyl plank on 900 sq ft at $5: $4,500
  • Kitchen update: $20,000
  • Two bathroom updates at $12,000: $24,000
  • Water heater: $1,400
  • Two dumpsters and a yard cleanup: $1,400

That’s $55,800 of work. Add a 15% contingency ($8,370) and a permit ($1,650), and the estimate is $65,820, or $43.88 a square foot: a medium rehab. If the house sells for $300,000 after repairs, the 70% rule gives a maximum offer of $300,000 × 70% − $65,820 = $144,180. You can run exactly this in the estimator and send the total straight to the MAO calculator with one click.

Same house, but run by a general contractor at 15% in a higher-cost area? About $86,500. That one setting is a $20,000 difference in what you can pay for the house, which is why the extras matter as much as the jobs.

Mistakes that blow up rehab budgets

  • Estimating from photos. Listing photos hide roofs, foundations and panels. Walk it, or price the worst case.
  • No contingency. A budget with no room for surprises is a budget that will be wrong.
  • Over-improving. Finishes above the neighbourhood cost you money and rarely raise the sale price.
  • Forgetting the time. A rehab that runs two months late costs two more months of interest and holding. Price the delay before it happens.
  • Taking one bid. Get at least two or three, from contractors who quote line by line against the same scope of work.

Turn your estimate into a scope of work

Your line-item estimate is also the start of your scope of work: the document contractors bid against. Write each job with its quantity and finish (for example “LVP, 900 sq ft, living room, kitchen and hall”), ask every contractor to price the same list, and pay in draws as work is finished rather than up front. When the bids come back, type the real numbers over the estimates and the budget updates itself. Use “Print or save PDF” in the estimator to keep a copy with the deal.

Sources

  • Remodeling 2025 Cost vs Value report, national averages (jlconline.com/cost-vs-value/2025/).
  • Angi and HomeAdvisor 2025 cost guides: interior painting, vinyl flooring, roof replacement, HVAC, water heaters, panel upgrades, rewiring, repiping, windows, dumpsters, foundation repair and building permits.
  • Investor rules of thumb for rehab cost per square foot: 2025–2026 guides from REsimpli, Real Estate Skills and BiggerPockets forums; FlipperForce on why the $10/$20/$30 rule is out of date.

Questions people ask

How much does it cost to rehab a house per square foot?

Many investors use about $20–40 a square foot for a light, cosmetic rehab, $40–75 for a medium rehab with a kitchen and bathrooms, $75–135 for a heavy one with systems or a roof, and more for a full gut. Your area and the house’s condition decide the real number.

How much contingency should I add to a rehab budget?

About 10% for a cosmetic job on a newer house and 15–20% for older houses, big rehabs or anything you couldn’t fully inspect.

How much does a kitchen cost in a flip?

A cosmetic kitchen update usually costs about $10,000–20,000 (paint or new cabinet doors, counters, sink and appliances). A minor mid-range kitchen remodel averages $28,458 nationally in the 2025 Cost vs Value report.

What is the 70% rule for repairs?

Pay no more than 70% of the after-repair value minus the repairs. With a $300,000 ARV and a $65,820 rehab, that’s a maximum offer of $144,180.

Should I use a general contractor on a flip?

A general contractor usually adds 10–20% for overhead and profit but runs the trades, the schedule and the permits. Managing the trades yourself saves that fee if you have the time and experience.

Filed under Deal analysis

More guides

All guides
  • Deal analysis

    , 5 min read

    How to Subdivide Land for Profit: Steps, Costs and When It’s Worth It

    How subdividing land works in 2026: the small-lot premium, six checks before you buy, the county process, what surveys, fees, perc tests, roads and power cost, and a worked example.

  • Cost & pricing

    , 3 min read

    How Much Does a Real Estate Website Cost in 2026?

    What a real estate website really costs in 2026: landing pages, full agent and investor sites, IDX and CRM sites, plus the monthly costs people forget.

  • Investor websites

    , 4 min read

    Carrot vs. a Custom Website for Real Estate Investors

    An honest comparison of Carrot and a custom we buy houses website: cost over three years, design, control, SEO, and when to stay or move.

See your new homepage before you pay anything

Tell me about your business and I’ll design a homepage mockup for your brand and market, usually within 48 hours. No cost, no contract.

WhatsApp Get a free mockup