Buy a big tract, split it into smaller lots, sell each one for more per acre than you paid. It’s one of the oldest plays in land investing, and it works, but only when the numbers leave room for everything that happens in between: the survey, the county, the road, the perc tests, the power and the months you wait for the last lot to sell. Here’s how subdividing land works, what it costs in 2026, and how to tell before you buy whether a split is worth it.
Why subdividing land can pay
Small lots usually sell for more per acre than one big tract, because far more buyers can afford a 5-acre lot than a 40-acre one. How big that premium is depends on the area:
- In Texas, the Real Estate Research Center at Texas A&M has found small rural tracts selling for roughly twice the price per acre of large tracts.
- In Illinois farmland data, 10–20 acre parcels sold about 12% above larger parcels in 2007–2011, down from about 36% the decade before.
- A Nevada study found price per acre was roughly flat once parcels passed about 25 acres.
So the small-lot premium is real, but it is not everywhere and it is not fixed. The only number that counts is what lots of your size have sold for near your parcel. Pull sold comps, not listings, and work out each one’s price per acre with the price per acre calculator.
Six things to check before you buy
- Zoning and minimum lot size. If the county’s minimum is 10 acres, your 40 acres makes four lots, not eight. Ask the planning office, or read the zoning code online.
- Minor or major subdivision. Most counties have a faster “minor” review for a few lots on an existing road, and a fuller “major” review for more lots or new roads, often with public hearings. The line is local: in Montana, 5 lots or fewer is minor. Staying under it can save months.
- Whether you need a plat at all. Rules differ by state. In Texas, for example, a county can’t require a plat when every lot is over 10 acres and no new streets are laid out. Ask before you assume.
- Road frontage and access. Lots on an existing public road are cheaper to create than lots that need a new road or easement. Every foot of new road is a cost.
- Septic and water. Where lots need septic, each one usually needs to pass a perc (soil) test. Land that won’t perc may not be buildable.
- Flood zones, wetlands and power. Check the flood map, look for wet ground, and ask the utility how far the nearest power line is and what an extension costs.
The subdivision process, step by step
- Pre-application meeting with the county planning office. Bring a rough sketch. They’ll tell you which rules apply and what they’ll want to see.
- Boundary survey and preliminary plat. A licensed surveyor surveys the parcel and draws the proposed lots, roads and easements.
- Perc tests and engineering where needed: soil tests for septic, road design, drainage, sometimes a wetland check.
- County review and approval. Staff review, sometimes a planning commission hearing for major subdivisions.
- Improvements: the road or easement, culverts, power, whatever the approval requires.
- Final plat, recorded with the county. Now each lot is a legal parcel you can sell.
- Stake the lots and sell them.
A simple split of a few lots on an existing road can be approved in weeks. A major subdivision with a new road can take many months.
What subdividing land costs
Every county is different, so treat these as 2024–2025 US examples to plan with, then get real quotes:
- Boundary survey: about $500–1,000 for an acre; about $6,000–8,000 for a 40-acre tract. The subdivision plat and lot staking come on top.
- County fees: often a base fee plus a fee per lot. Some real examples: Warren County, Ohio charges $700 plus $70 a lot for each of the preliminary and final plat; Lewis and Clark County, Montana charges $900 plus $50 a lot for a minor subdivision’s preliminary review; Pender County, North Carolina charges $150 plus $10 a lot for a minor preliminary plat.
- Perc test: about $725–1,300 a lot.
- Gravel road: very roughly $15–50 a linear foot for a 12-foot gravel road, more with culverts or paving.
- Power: often $5–25 a foot to extend a line, more on long runs or with a transformer.
- Selling: land commissions are commonly 5–10%, plus title, deed and recording costs on every lot sold, and marketing.
- Holding: property tax, insurance and loan interest every month until the last lot sells. Raw land loans often need 30–50% down at higher rates than home loans.
Run the numbers: a worked example
You find 40 acres for $160,000 ($4,000 an acre), with $3,000 of closing costs. Sold whole today, it might bring about $180,000. Small lots nearby sell for about $8,000 an acre, so you plan 8 lots of 4.75 acres, keeping 5% of the land for a road, at $38,000 each.
- Lot sales: 8 × $38,000 = $304,000
- Survey and plat $9,000, staking $3,200, county fees $2,500, perc tests $8,000, 1,200 feet of gravel road $30,000, power $24,000, other $3,000: $79,700 to split and improve
- Commission at 8%, closing and marketing on 8 lots: $36,320
- 18 months of property tax: $2,100
The split makes $22,880, about $21,280 more than selling the tract whole. But look at the downside before you celebrate: if the lots sell for 10% less, the same deal loses about $5,100. The break-even is $34,891 a lot. That’s the real lesson of subdividing: the margin is often thinner than the price-per-acre difference makes it look.
You can change every number in the free land subdivision profit calculator, which also shows the profit if sales take a year longer or prices drop 20%.
How to make a split work better
- Fewer lots on existing road frontage. Three or four lots that need no new road can beat eight lots that need one, and often qualify as a minor subdivision.
- Offer owner financing. Many land buyers shop by monthly payment. Seller financing sells lots faster and can earn interest on top. The owner financing calculator shows the payment buyers will see.
- Sell the first lots early. Early sales cut your holding costs and prove the price for the rest.
- Price lots from sold comps, not hope. If comparable lots haven’t sold at your price, the plan is a guess.
- Compare it with a simple flip. Before you commit to a split, run the same parcel through the land deal analyzer as a buy-and-resell: if a quick flip makes nearly as much, the extra months and risk of subdividing may not be worth it.
Selling the lots
Once the plat is recorded, every lot needs a listing that sells it on its own: acreage, price, terms, road access, utilities, a map and good photos. Put them on the big land sites and on your own website, where buyers can see every lot in the subdivision side by side. The free land listing builder writes the website text, the listing-site text, a Facebook post, an email and a printable flyer from one set of facts, so each lot is listed in minutes.
Sources
- Texas A&M Real Estate Research Center, small and large rural tract prices (trerc.tamu.edu).
- farmdoc daily, University of Illinois: trends in Illinois farmland parcel size and price (2013).
- Journal of Real Estate Finance and Economics: price per acre and parcel size, Nevada (2019).
- County fee schedules: Warren County OH, Lewis and Clark County MT (effective October 2025), Pender County NC (FY 2025–26).
- Montana Code 76-3 (minor subdivisions); Texas Local Government Code 232.0015 (plat exceptions).
- Fixr and HomeAdvisor 2025 cost guides: land surveys, perc tests, gravel roads; HomeGuide: utilities on land.





